Skip to content
Krevo
KREVO Shield Polyurea
Waterproofing

KREVO Shield Polyurea

Pure polyurea waterproofing and protective membrane · Hot spray applied · Fast curing

Type
Polyurea Coating
Pack sizes
Component A: 200 L drum (225 kg); Component B: 200 L drum (205 kg)
Coverage
Approximately 1 kg/m² per mm of film thickness
Shelf life
12 months in original unopened packs at +5 °C to +30 °C
Technical data sheet

Overview

KREVO Shield Polyurea is specified as a two-component, rapid-reacting pure polyurea membrane for spray application to prepared concrete and steel. It forms a seamless, elastic, waterproof protective layer with abrasion and chemical resistance for demanding industrial and liquid-retaining structures. Application requires heated plural-component spray equipment operated by trained specialists.

Advantages

  • Seamless spray-applied waterproofing membrane, including complex details.
  • Very rapid gel and cure for shorter interruption and early return to service.
  • Flexible membrane with crack-bridging capability and abrasion resistance.
  • Good resistance to selected chemicals, water and de-icing salts.
  • Suitable for concrete and steel protection, with high tensile strength and elongation.

Typical uses

  • Industrial and manufacturing floors
  • Secondary containment
  • Water-retaining structures
  • Wastewater tanks, bunds and pits
  • Submerged and cut-and-cover structures
  • Walkways and parking decks
  • Hydraulic steel structures and truck-bed linings

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Shield Polyurea

48

Shore D hardness | EN ISO 868

17 MPa

Tensile strength | ISO 527-1

340%

Elongation at break | ISO 527-1

At least 1.5 MPa

Tensile adhesion to concrete | EN 1542

Approximately 90 kN/m

Tear strength | ISO 34-1

Approximately 100%

Solid content by weight

−30 °C to +100 °C

Continuous dry-service range

Product information

Chemical base
Two-component pure polyurea
Appearance / colour
Grey, seamless elastomeric membrane
Mixing system
Heated plural-component high-pressure spray equipment
Typical coating thickness
Approximately 2 mm; subject to project system design
Nominal mix ratio
Component A (ISO) : Component B (resin) = 1 : 1
Theoretical consumption
Approximately 1 kg/m² per mm of film thickness
Storage / shelf life
12 months in original unopened packs at +5 °C to +30 °C
Crack bridging | EN 1062-7
Class A4 (static) / B3.1 (dynamic)

FAQ

KREVO Shield Polyurea: questions

What is KREVO Shield Polyurea?

KREVO Shield Polyurea is specified as a two-component, rapid-reacting pure polyurea membrane for spray application to prepared concrete and steel. It forms a seamless, elastic, waterproof protective layer with abrasion and chemical resistance for demanding industrial and liquid-retaining structures. Application requires heated plural-component spray equipment operated by trained specialists.

What is KREVO Shield Polyurea used for?

KREVO Shield Polyurea is used for: industrial and manufacturing floors; secondary containment; water-retaining structures; wastewater tanks, bunds and pits; submerged and cut-and-cover structures; walkways and parking decks; hydraulic steel structures and truck-bed linings.

What pack sizes is KREVO Shield Polyurea available in?

KREVO Shield Polyurea is supplied in Component A: 200 L drum (225 kg); Component B: 200 L drum (205 kg).

What is the coverage of KREVO Shield Polyurea?

Coverage / consumption: Approximately 1 kg/m² per mm of film thickness. Actual consumption depends on the substrate and application; see the technical data sheet.

What is the shelf life of KREVO Shield Polyurea?

Shelf life / storage: 12 months in original unopened packs at +5 °C to +30 °C.

Is there a technical data sheet for KREVO Shield Polyurea?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Shield Polyurea