Skip to content
Krevo
KREVO Inject EP
Injection System

KREVO Inject EP

Low-viscosity two-component epoxy injection resin · Structural crack sealing · Solvent-free

Type
Structural Epoxy Injection
Pack sizes
5 kg two-component set; 6 × 1 kg pack option
Shelf life
24 months in closed packs; condition at +15 °C to +30 °C
Technical data sheet

Overview

KREVO Inject EP is a two-component, solvent-free, low-viscosity epoxy injection resin for filling and bonding static cracks and internal voids in sound concrete and masonry. It can be introduced by pressure injection or gravity filling to restore continuity across cracks and form a barrier to water and harmful ingress. It is suited to dry and saturated-surface-dry substrates without flowing or standing water.

Advantages

  • Low-viscosity resin penetrates narrow cracks and internal voids.
  • Strong adhesion to sound concrete, mortar, stone, steel and wood.
  • Solvent-free formula with high hardened mechanical resistance.
  • Suitable for dry and damp crack faces without free water.
  • Hardens with minimal shrinkage to form a rigid structural bond.

Typical uses

  • Structural crack injection in bridges and buildings
  • Columns, beams and foundations
  • Concrete walls, slabs and pavements
  • Water-retaining structures
  • Static cracks in masonry and stone
  • Gravity-filling of horizontal cracks and pressure-injection of vertical cracks

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Inject EP

Approximately 1.1 kg/L

Mixed density

1,200 mPa·s

Viscosity at +10 °C

430 mPa·s

Viscosity at +20 °C

220 mPa·s

Viscosity at +30 °C

Product information

Generic type
Two-component, solvent-free, low-viscosity epoxy injection resin
Chemical composition
Solvent-free modified epoxy resin with matched hardener
Mixing ratio A : B
2 : 1 by weight; 1.8 : 1 by volume
Appearance / colour
Clear yellow liquid after mixing Parts A + B
Substrate condition
Dry or saturated-surface-dry, with no free water
Shelf life / storage
24 months in closed packs; condition at +15 °C to +30 °C
Compressive strength | ASTM D695
52 MPa at 7 days (+23 °C)
Tensile strength | ISO 527
37 MPa at 7 days (+23 °C)
Flexural tensile strength | DIN 53452
61 MPa at 7 days (+23 °C)
Flexural modulus | DIN 53452
1,800 MPa at 7 days (+23 °C)
Tensile adhesion to concrete
> 4 MPa; concrete failure at 7 days
Thermal expansion | EN ISO 1770
8.9 × 10⁻⁵ per °C (−20 °C to +40 °C)

FAQ

KREVO Inject EP: questions

What is KREVO Inject EP?

KREVO Inject EP is a two-component, solvent-free, low-viscosity epoxy injection resin for filling and bonding static cracks and internal voids in sound concrete and masonry. It can be introduced by pressure injection or gravity filling to restore continuity across cracks and form a barrier to water and harmful ingress. It is suited to dry and saturated-surface-dry substrates without flowing or…

What is KREVO Inject EP used for?

KREVO Inject EP is used for: structural crack injection in bridges and buildings; columns, beams and foundations; concrete walls, slabs and pavements; water-retaining structures; static cracks in masonry and stone; gravity-filling of horizontal cracks and pressure-injection of vertical cracks.

What pack sizes is KREVO Inject EP available in?

KREVO Inject EP is supplied in 5 kg two-component set; 6 × 1 kg pack option.

What is the shelf life of KREVO Inject EP?

Shelf life / storage: 24 months in closed packs; condition at +15 °C to +30 °C.

Is there a technical data sheet for KREVO Inject EP?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Inject EP