KREVO Shield Zinc Primer
Inorganic zinc-rich primer · Galvanic corrosion protection · Industrial & marine steel
- Type
- Zinc Rich Primer
- Pack sizes
- 1 US gal: 0.75 gal base + 6.6 kg zinc; 5 US gal: 3.75 gal base + 33 kg zinc
- Coverage
- Approximately 8.2 m²/L at 75 microns DFT
See it applied
Priming blast-cleaned steel
How KREVO Shield Zinc Primer goes on site, step by step.
- 1 Blast cleaning
- 2 Zinc-rich primer
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Shield Zinc Primer is a solvent-based, inorganic zinc-rich protective coating for prepared steel. The zinc-rich film is designed to provide galvanic corrosion protection on structural steel used in industrial, marine and aggressive atmospheric environments. It can be used as a primer or as part of a compatible multi-coat protective system.
Advantages
- High zinc loading provides sacrificial galvanic protection to suitably prepared steel.
- Fast handling and curing under suitable ambient humidity and temperature conditions.
- Suitable for application using conventional or airless spray equipment.
- Good resistance to corrosion and salt contamination in demanding atmospheres.
- Can be overcoated with compatible epoxy, polyurethane, acrylic or high-heat systems after appropriate curing.
Typical uses
- Structural steel and pipe supports
- Industrial plants
- Marine and coastal structures
- Steel under approved fireproofing systems
- Bridges and exposed fabricated steelwork
- Tank and equipment exteriors
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Specification
- Generic type
- Solvent-based inorganic zinc-rich steel primer
- Appearance / colour
- Flat finish; green or grey
- Recommended dry film thickness
- 51–76 microns (2–3 mils) per coat
- Maximum recommended DFT
- Avoid thickness above 150 microns (6 mils)
- Volume solids | ASTM D2697
- Approximately 62.3% ± 2%
- Zinc dust in dry film
- Approximately 85% by weight
- Theoretical coverage
- Approximately 8.2 m²/L at 75 microns DFT
- Salt spray resistance | ASTM B117
- 43,000 hours without rust, blisters, cracking or delamination in stated test
- Slip coefficient | ASTM A325
- 0.68; Class B test benchmark for suitable faying surfaces
- Immersion test | AASHTO M300
- 650 hours in 5% sodium chloride in stated test
- Pencil hardness | ASTM D3363
- 2H
- VOC as supplied | EPA Method 24
- Approximately 479 g/L
- Maximum untopcoated service
- 400 °C continuous / 427 °C intermittent
- With qualified high-heat topcoat
- 540 °C continuous / 650 °C intermittent
- Corrosion resistance mechanism
- Zinc-rich galvanic protection of prepared steel
Used together with
Steel protection system
KREVO Shield Zinc Primer is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.
-
1Zinc-rich primer
KREVO Shield Zinc Primer
This product
-
2Epoxy intermediate coat
-
3Polyurethane top coat
FAQ
KREVO Shield Zinc Primer: questions
What is KREVO Shield Zinc Primer?
KREVO Shield Zinc Primer is a solvent-based, inorganic zinc-rich protective coating for prepared steel. The zinc-rich film is designed to provide galvanic corrosion protection on structural steel used in industrial, marine and aggressive atmospheric environments. It can be used as a primer or as part of a compatible multi-coat protective system.
What is KREVO Shield Zinc Primer used for?
KREVO Shield Zinc Primer is used for: structural steel and pipe supports; industrial plants; marine and coastal structures; steel under approved fireproofing systems; bridges and exposed fabricated steelwork; tank and equipment exteriors.
How is KREVO Shield Zinc Primer applied?
In outline: 1. Blast cleaning 2. Zinc-rich primer. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Shield Zinc Primer available in?
KREVO Shield Zinc Primer is supplied in 1 US gal: 0.75 gal base + 6.6 kg zinc; 5 US gal: 3.75 gal base + 33 kg zinc.
What is the coverage of KREVO Shield Zinc Primer?
Coverage / consumption: Approximately 8.2 m²/L at 75 microns DFT. Actual consumption depends on the substrate and application; see the technical data sheet.
Is there a technical data sheet for KREVO Shield Zinc Primer?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Coatings & Linings
Zinc Phosphate Primer
Coatings & Linings
KREVO Shield EP-ZP
High-build epoxy zinc-phosphate primer · Phenalkamine cured · Industrial steel protection
View product
Epoxy Mid Coat
Coatings & Linings
KREVO Shield EP-Mid
High-solids epoxy intermediate coating · Modified polyamido-amine cured · Steel protection
View product
PU Top Coat
Coatings & Linings
KREVO Shield PU-Top
High-gloss aliphatic acrylic polyurethane topcoat · Weather-resistant protective finish · Steel coating systems
View product