Skip to content
Krevo
KREVO Carbon Strip
CFRP Systems

KREVO Carbon Strip

High-Strength pultruded CFRP strengthening strip · HS, IM and HM grades |

Type
CFRP Strip
Pack sizes
100 m rolls; dry and shaded storage; no specified shelf-life limit under these conditions
Technical data sheet

Overview

KREVO Carbon Strip is a black, pultruded carbon-fiber-reinforced polymer (CFRP) strip for externally bonded structural strengthening. When bonded using a compatible high-performance epoxy adhesive, the strip is intended to resist tensile, shear and impact demands where supported by structural design. The range includes high-strength (HS), intermediate-modulus (IM) and high-modulus (HM) grades.

Advantages

  • Lightweight system with a high strength-to-weight ratio and fast installation.
  • Available in high-strength, intermediate-modulus and high-modulus grades.
  • Multiple standard strip widths and nominal thicknesses suit varied designs.
  • Suitable for straight surfaces and selected curved details subject to design approval.
  • Can be combined with compatible CFRP reinforcing rods where specified.

Typical uses

  • Beams and slabs
  • Walls and columns
  • Culverts
  • Curved and complex structural details
  • External tensile and flexural strengthening of reinforced concrete members

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Material type
Pultruded carbon-fiber-reinforced polymer (CFRP) strip / plate
Colour
Black
Available grades
HS - High Strength | IM - Intermediate Modulus | HM - High Modulus
HS strip thicknesses
HS 1200: 1.2 mm | HS 1400: 1.4 mm
IM strip thickness
IM 1200: 1.2 mm
HM strip thicknesses Standard widths
HM 1200: 1.2 mm | HM 1400: 1.4 mm HS 1200: 20, 50, 60, 80, 100, 120, 150 mm; HS 1400: 50, 60, 80, 90, 120 mm; IM 1200: 50, 60, 80, 90, 100, 120 mm; HM 1200/1400: 50, 80, 120 mm
Carbon fiber content
HS >68% | IM >68% | HM >68%
Nominal thickness
HS 1.2/1.4 mm | IM 1.2 mm | HM 1.2/1.4 mm
Modulus of elasticity
HS >165 GPa | IM >210 GPa | HM >400 GPa
Tensile strength
HS >3,000 MPa | IM >2,400 MPa | HM >1,500 MPa

FAQ

KREVO Carbon Strip: questions

What is KREVO Carbon Strip?

KREVO Carbon Strip is a black, pultruded carbon-fiber-reinforced polymer (CFRP) strip for externally bonded structural strengthening. When bonded using a compatible high-performance epoxy adhesive, the strip is intended to resist tensile, shear and impact demands where supported by structural design. The range includes high-strength (HS), intermediate-modulus (IM) and high-modulus (HM) grades.

What is KREVO Carbon Strip used for?

KREVO Carbon Strip is used for: beams and slabs; walls and columns; culverts; curved and complex structural details; external tensile and flexural strengthening of reinforced concrete members.

What pack sizes is KREVO Carbon Strip available in?

KREVO Carbon Strip is supplied in 100 m rolls; dry and shaded storage; no specified shelf-life limit under these conditions.

Is there a technical data sheet for KREVO Carbon Strip?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Carbon Strip