KREVO Shield EP-Mid
High-solids epoxy intermediate coating · Modified polyamido-amine cured · Steel protection
- Type
- Epoxy Mid Coat
- Pack sizes
- 19 L kit (approx. 30 kg shipping); minimum 12 months
- Coverage
- 32 m²/L at 25 µm (8 m²/L at 100 µm), before loss
See it applied
Epoxy intermediate coat on steel
How KREVO Shield EP-Mid goes on site, step by step.
- 1 Spray the mid coat
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Shield EP-Mid is a two-component, high-solids modified polyamido-amine epoxy protective coating for prepared steel surfaces. It provides high film build, edge protection and abrasion resistance, and is designed for use as a primer or intermediate coat in compatible atmospheric protective-coating systems over steel or suitable zinc primers.
Advantages
- High-solids epoxy coating for corrosion protection of prepared steel.
- Excellent film build and edge coverage with good abrasion resistance.
- Suitable for use over sound steel or qualified zinc-rich primer systems.
- Good surface tolerance and broad topcoat compatibility.
- May be used with suitable acrylic, alkyd, epoxy or polyurethane finishes.
Typical uses
- Industrial structural steel
- Steel pipework and equipment
- Marine and coastal atmospheric exposure
- Protective steel-coating systems
- Maintenance of plant and industrial structures
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Specification
- Generic type
- Two-component modified polyamido-amine epoxy
- Colours
- Red or grey
- Finish
- Semi-gloss
- Recommended dry film thickness
- 100–200 µm (4–8 mils) per coat
- Volume solids
- Approximately 80% ± 2%
- Theoretical coverage
- 32 m²/L at 25 µm (8 m²/L at 100 µm), before loss
- Mixing ratio (A:B)
- 4:1 by volume; power-mix full matched kits
- VOC as supplied
- 200 g/L
- Pot life at 25 °C
- Approximately 3 hours; shorter in hot conditions
- Dry temperature resistance
- 93 °C continuous; 121 °C intermittent
- Airless spray thinning
- Up to 15% with approved compatible reducer
- Brush / roller thinning
- Up to 5% with approved compatible reducer
- Steel blast cleaning
- SSPC-SP 10 / ISO 8501-1 Sa 2½; 25–50 µm profile
- Galvanized steel preparation
- Degrease and roughen, e.g. SSPC-SP 7 / SP 11
- Topcoats / service
- Acrylic, alkyd, epoxy or polyurethane; atmospheric use
Used together with
Steel protection system
KREVO Shield EP-Mid is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.
-
1Zinc-rich primer
-
2Epoxy intermediate coat
KREVO Shield EP-Mid
This product
-
3Polyurethane top coat
FAQ
KREVO Shield EP-Mid: questions
What is KREVO Shield EP-Mid?
KREVO Shield EP-Mid is a two-component, high-solids modified polyamido-amine epoxy protective coating for prepared steel surfaces. It provides high film build, edge protection and abrasion resistance, and is designed for use as a primer or intermediate coat in compatible atmospheric protective-coating systems over steel or suitable zinc primers.
What is KREVO Shield EP-Mid used for?
KREVO Shield EP-Mid is used for: industrial structural steel; steel pipework and equipment; marine and coastal atmospheric exposure; protective steel-coating systems; maintenance of plant and industrial structures.
How is KREVO Shield EP-Mid applied?
In outline: 1. Spray the mid coat. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Shield EP-Mid available in?
KREVO Shield EP-Mid is supplied in 19 L kit (approx. 30 kg shipping); minimum 12 months.
What is the coverage of KREVO Shield EP-Mid?
Coverage / consumption: 32 m²/L at 25 µm (8 m²/L at 100 µm), before loss. Actual consumption depends on the substrate and application; see the technical data sheet.
Is there a technical data sheet for KREVO Shield EP-Mid?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Coatings & Linings
Zinc Rich Primer
Coatings & Linings
KREVO Shield Zinc Primer
Inorganic zinc-rich primer · Galvanic corrosion protection · Industrial & marine steel
View product
Zinc Phosphate Primer
Coatings & Linings
KREVO Shield EP-ZP
High-build epoxy zinc-phosphate primer · Phenalkamine cured · Industrial steel protection
View product
PU Top Coat
Coatings & Linings
KREVO Shield PU-Top
High-gloss aliphatic acrylic polyurethane topcoat · Weather-resistant protective finish · Steel coating systems
View product