Skip to content
Krevo
KREVO Mix Superplast
Concrete Admix

KREVO Mix Superplast

High-range water-reducing superplasticizer and retarder · Slump retention · High-quality concrete

Type
Superplasticiser
Pack sizes
5 L, 20 L, 200 L, 1,000 L IBC; bulk delivery option
Shelf life
12 months minimum in properly stored original packaging
Technical data sheet

Overview

KREVO Mix Superplast is a liquid, organic polymer-based concrete admixture designed to provide high-range water reduction and improved flow. It supports the production of workable, high-quality concrete with extended slump retention under demanding placing and hot-weather conditions. It can be used to reduce mixing water while maintaining the required consistency, with potential improvements in early and ultimate strength.

Advantages

  • Significantly increases workability without additional mixing water.
  • Helps retain slump during transportation and concrete placement.
  • Can achieve up to 25% water reduction in a suitably designed mix.
  • Supports improved early strength, surface finish and water tightness.
  • Suitable for demanding hot-climate concreting with controlled air entrainment.

Typical uses

  • Ready-mix concrete
  • High-workability and flowing mixes
  • Concrete in hot climates
  • Difficult placing conditions
  • Pumped and heavily reinforced concrete
  • Quality structural concrete requiring slump retention and a reduced water/cement ratio

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Generic type
High-range water-reducing superplasticizer and retarder
Chemical base
Organic polymer blend
Appearance / colour
Brown liquid
Specific gravity / pH
1.19 ± 0.03 / pH ≥ 6
Total chloride ion
≤ 0.2% (EN 934-2 test reference)
Shelf life
12 months minimum in properly stored original packaging
Storage conditions
Sealed, dry, +5 °C to +35 °C; avoid sun and frost
Recommended dosage
0.6–2.0% by weight of cement; trial mix required
Water reduction
Up to 25% with suitable concrete mix design
Superplasticizing effect
Higher flow and workability without added water
Slump retention
Extended workability during transport and placing
Strength development
Can improve early and ultimate strength with reduced water
Dispensing
Into mixing water or separately into freshly mixed concrete
Additional mixing
At least 1 minute per m³ after post-batch addition
Reference standards
ASTM C494 Type G; EN 934-2 — compliance to be verified

FAQ

KREVO Mix Superplast: questions

What is KREVO Mix Superplast?

KREVO Mix Superplast is a liquid, organic polymer-based concrete admixture designed to provide high-range water reduction and improved flow. It supports the production of workable, high-quality concrete with extended slump retention under demanding placing and hot-weather conditions. It can be used to reduce mixing water while maintaining the required consistency, with potential improvements in…

What is KREVO Mix Superplast used for?

KREVO Mix Superplast is used for: ready-mix concrete; high-workability and flowing mixes; concrete in hot climates; difficult placing conditions; pumped and heavily reinforced concrete; quality structural concrete requiring slump retention and a reduced water/cement ratio.

What pack sizes is KREVO Mix Superplast available in?

KREVO Mix Superplast is supplied in 5 L, 20 L, 200 L, 1,000 L IBC; bulk delivery option.

What is the shelf life of KREVO Mix Superplast?

Shelf life / storage: 12 months minimum in properly stored original packaging.

Is there a technical data sheet for KREVO Mix Superplast?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Mix Superplast