Skip to content
Krevo
KREVO Mix PP-Fibre
Concrete Admix

KREVO Mix PP-Fibre

Polypropylene microfibre for concrete · Plastic shrinkage crack control · Cementitious mixes

Type
PP Fibre
Pack sizes
0.6 kg water-soluble bags; 30 bags per box (18 kg)
Shelf life
12 months; unopened, dry, shaded, +5 °C to +45 °C
Technical data sheet

Overview

KREVO Mix PP-Fibre is a fine, 100% virgin polypropylene microfibre designed for incorporation into concrete, shotcrete and cementitious mixes. The uniformly dispersed fibres help control plastic shrinkage and settlement cracking and improve early-age integrity and surface durability. A surface treatment assists initial dispersion and interaction with the cement paste.

Advantages

  • Helps reduce plastic shrinkage and plastic settlement micro-cracking.
  • Enhances early-age crack control in concrete and shotcrete.
  • Fine, lightweight fibres disperse through a properly mixed cementitious matrix.
  • Suitable for hot and tropical climates with appropriate curing practices.
  • In shotcrete, may reduce rebound and support thicker single-pass application.

Typical uses

  • Ready-mix and site-mixed concrete
  • Shotcrete
  • Cementitious overlays
  • Industrial floor slabs
  • Precast patch repairs
  • Water-retaining structures
  • High-performance concrete
  • Tunnel segments

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Mix PP-Fibre

12 mm – 18 mm – 25mm

Nominal fibre length

Approximately 18 µm

Nominal fibre diameter

Approximately +160 °C

Melting point

Product information

Generic type
100% virgin polypropylene microfibre
Appearance / colour
Fine, white fibre
Density at +25 °C
Approximately 0.91 kg/L
Shelf life / storage
12 months; unopened, dry, shaded, +5 °C to +45 °C
Recommended dosage
0.6 kg/m³ (600 g/m³); confirm by trial mixing
Primary function
Control plastic and drying-shrinkage micro-cracking
Concrete applications
Normal concrete, high-performance concrete and overlays
Shotcrete applications
Crack control; may reduce rebound and pump-line pressure
Precast applications
Repair patches and tunnel lining segments
Water-retaining structures
Used as mix reinforcement for early-age crack control
Binder compatibility
Portland cement, fly ash, GGBS and silica fume systems
Relevant fibre standard
EN 14889-2 polymer fibre specification; compliance to be confirmed

FAQ

KREVO Mix PP-Fibre: questions

What is KREVO Mix PP-Fibre?

KREVO Mix PP-Fibre is a fine, 100% virgin polypropylene microfibre designed for incorporation into concrete, shotcrete and cementitious mixes. The uniformly dispersed fibres help control plastic shrinkage and settlement cracking and improve early-age integrity and surface durability. A surface treatment assists initial dispersion and interaction with the cement paste.

What is KREVO Mix PP-Fibre used for?

KREVO Mix PP-Fibre is used for: ready-mix and site-mixed concrete; shotcrete; cementitious overlays; industrial floor slabs; precast patch repairs; water-retaining structures; high-performance concrete; tunnel segments.

What pack sizes is KREVO Mix PP-Fibre available in?

KREVO Mix PP-Fibre is supplied in 0.6 kg water-soluble bags; 30 bags per box (18 kg).

What is the shelf life of KREVO Mix PP-Fibre?

Shelf life / storage: 12 months; unopened, dry, shaded, +5 °C to +45 °C.

Is there a technical data sheet for KREVO Mix PP-Fibre?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Mix PP-Fibre