Skip to content
Krevo
KREVO Shield PU-Top
Coatings & Linings

KREVO Shield PU-Top

High-gloss aliphatic acrylic polyurethane topcoat · Weather-resistant protective finish · Steel coating systems

Type
PU Top Coat
Pack sizes
1- and 5-gallon kit sizes; 24 months
Coverage
13.8 m²/L at 50 µm; 9.2 m²/L at 75 µm, before loss
Technical data sheet

See it applied

Polyurethane top coat on steel

How KREVO Shield PU-Top goes on site, step by step.

  1. 1 Spray the top coat
  2. 2 Protected steel

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Shield PU-Top is a two-component aliphatic acrylic polyurethane finish coat for industrial protective coating systems. It is designed to provide a smooth, high-gloss decorative and protective finish with excellent resistance to weathering, abrasion and industrial exposure.

Advantages

  • High-gloss, durable finish with excellent outdoor weathering properties.
  • High-solids formulation with comparatively low VOC content.
  • Good flow, colour and gloss retention with impact and abrasion resistance.
  • Suitable for spray and roller application over compatible primed surfaces.
  • Flexible coating-system design with compatible epoxy intermediate layers.

Typical uses

  • Industrial structural steel
  • Plant equipment and exposed pipework
  • Marine and coastal atmospheric steelwork
  • Tanks and supporting structures (external)
  • Industrial maintenance topcoats

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Generic type
Two-component aliphatic acrylic polyurethane topcoat
Colours
Industrial colour range; colour availability to be confirmed
Finish
High gloss
Recommended dry film thickness
50–75 µm (2–3 mils) per coat
Volume solids
Approximately 70% ± 2%
Theoretical coverage
13.8 m²/L at 50 µm; 9.2 m²/L at 75 µm, before loss
Mixing ratio (A:B)
4:1 by volume; mix complete matched kits
VOC as supplied
Approximately 264 g/L (shade dependent)
Pot life at 24 °C
Approximately 4 hours; decreases with temperature
Dry temperature resistance
93 °C continuous; 121 °C intermittent
Airless / conventional spray
Apply with suitable equipment; qualified thinner up to 20%
Brush / roller
Touch-up / selected areas; approved compatible reducer
Application over primed steel
Use a compatible cured epoxy / qualified primer system
Weathering / abrasion
Weather-resistant glossy finish; system testing is application-specific
Topcoat service
For exposed atmospheric environments; protect from moisture during cure

Used together with

Steel protection system

KREVO Shield PU-Top is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Zinc-rich primer

  2. 2Epoxy intermediate coat

  3. 3Polyurethane top coat

    KREVO Shield PU-Top This product

FAQ

KREVO Shield PU-Top: questions

What is KREVO Shield PU-Top?

KREVO Shield PU-Top is a two-component aliphatic acrylic polyurethane finish coat for industrial protective coating systems. It is designed to provide a smooth, high-gloss decorative and protective finish with excellent resistance to weathering, abrasion and industrial exposure.

What is KREVO Shield PU-Top used for?

KREVO Shield PU-Top is used for: industrial structural steel; plant equipment and exposed pipework; marine and coastal atmospheric steelwork; tanks and supporting structures (external); industrial maintenance topcoats.

How is KREVO Shield PU-Top applied?

In outline: 1. Spray the top coat 2. Protected steel. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Shield PU-Top available in?

KREVO Shield PU-Top is supplied in 1- and 5-gallon kit sizes; 24 months.

What is the coverage of KREVO Shield PU-Top?

Coverage / consumption: 13.8 m²/L at 50 µm; 9.2 m²/L at 75 µm, before loss. Actual consumption depends on the substrate and application; see the technical data sheet.

Is there a technical data sheet for KREVO Shield PU-Top?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Shield PU-Top