Skip to content
Krevo
KREVO Plug Rapid
Injection System

KREVO Plug Rapid

Ultra-rapid-setting water-stopping mortar · Single-component · Active leak plugging

Type
Water Plug
Pack sizes
25 kg bags / Bucket
Shelf life
Dry, shaded conditions below +25 °C
Technical data sheet

See it applied

Injecting basement cracks

How KREVO Plug Rapid goes on site, step by step.

  1. 1 Stop active leaks
  2. 2 Inject the cracks

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Plug Rapid is an ultra-fast-setting, single-component cementitious mortar for stopping active water leaks and sealing local openings in concrete, masonry and stone. A dry, grey powder based on chloride-free rapid-setting hydraulic cements and silica sand, it can be applied as a compacted dry powder or mixed with water for immediate placement.

Advantages

  • Rapid initial set for emergency leak-stopping and local sealing works.
  • Suitable for dry-powder application or hand-mixed placement at active leaks.
  • Chloride-free cement-based composition with durable, water-resistant finish.
  • No noticeable solvent odour or fumes during normal use.
  • Single-component material requiring only clean water for the wet method.

Typical uses

  • Active leaks at construction joints
  • Form-tie holes
  • Water-bearing cracks
  • Wall kickers
  • Honeycombed concrete
  • Manholes
  • Service connections
  • Water tanks and masonry structures

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Material type
Single-component, ultra-rapid-setting cementitious water-plugging mortar
Composition
Rapid-setting chloride-free hydraulic cements and silica sands
Appearance / colour
Dry grey powder
Application method
Dry application or wet hand-mixed mortar
Typical wet mixing proportion
3-4 parts powder to 1 part clean water, by volume
Storage conditions
Dry, shaded conditions below +25 °C
Shelf life
6 months when correctly stored in unopened packaging
Initial setting time | Vicat
60-120 seconds at +25 °C
Compressive strength | ASTM C109
28 MPa at 28 days
Water-to-powder ratio
Approximately 0.20 (for strength-test specimens)
Volatile organic content (VOC)
< 10 g/L

Used together with

Leak sealing and crack injection

KREVO Plug Rapid is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Stop active leaks

    KREVO Plug Rapid This product
  2. 2Inject the cracks

FAQ

KREVO Plug Rapid: questions

What is KREVO Plug Rapid?

KREVO Plug Rapid is an ultra-fast-setting, single-component cementitious mortar for stopping active water leaks and sealing local openings in concrete, masonry and stone. A dry, grey powder based on chloride-free rapid-setting hydraulic cements and silica sand, it can be applied as a compacted dry powder or mixed with water for immediate placement.

What is KREVO Plug Rapid used for?

KREVO Plug Rapid is used for: active leaks at construction joints; form-tie holes; water-bearing cracks; wall kickers; honeycombed concrete; manholes; service connections; water tanks and masonry structures.

How is KREVO Plug Rapid applied?

In outline: 1. Stop active leaks 2. Inject the cracks. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Plug Rapid available in?

KREVO Plug Rapid is supplied in 25 kg bags / Bucket.

What is the shelf life of KREVO Plug Rapid?

Shelf life / storage: Dry, shaded conditions below +25 °C.

Is there a technical data sheet for KREVO Plug Rapid?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Plug Rapid