Skip to content
Krevo
KREVO Proof Cem-Flex
Waterproofing

KREVO Proof Cem-Flex

Two-component polymer-modified cementitious waterproofing slurry · Brush or trowel applied

Type
Cementitious Coating
Pack sizes
30 kg set: 10 kg Part A liquid + 30 kg Part B powder
Shelf life
At least 6 months unopened when stored dry, shaded at +5 °C to +35 °C
Technical data sheet

Overview

KREVO Proof Cem-Flex is a two-component, polymer-modified cementitious waterproofing slurry supplied as a pre-measured liquid-polymer and cementitious-powder set. Mixed to a homogeneous grey slurry, the material is designed to waterproof and damp-proof sound concrete, mortar and masonry surfaces in below-grade and exposed construction applications.

Advantages

  • Pre-proportioned components for convenient mixing and application.
  • Good adhesion to prepared substrates with resistance to water penetration.
  • Suitable for brush-applied slurry or thicker trowel application.
  • Slightly flexible coating with resistance to abrasion and erosion.
  • Non-flammable, non-corrosive cementitious waterproofing system.

Typical uses

  • Basements and retaining walls
  • Water tanks and swimming pools
  • Flat roofs, balconies and terraces
  • Bridges and sea walls
  • Tunnels
  • Waterproofing of concrete, mortar, brickwork and suitably prepared steel

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Proof Cem-Flex

Approximately 90

Shore A hardness | ASTM D2240

40 MPa at 28 days

Compressive strength | ASTM C109

9 MPa at 28 days

Flexural tensile strength | ASTM C348

1 MPa

Tensile adhesion | ASTM D4541

66% after 14 days

Elongation

Up to 1.2 mm

Crack-bridging ability

Product information

Material type
Two-component, polymer-modified cementitious waterproofing slurry
Chemical base
Cement, selected graded aggregates and polymer dispersion
Component appearance
Part A: white liquid; Part B: grey powder; mixed: grey slurry
Mixing ratio (A:B) by weight
Brush 1:4; trowel 1:4.5 (use approx. 90% of the Part A liquid)
Fresh mortar density
Approximately 2.1-2.2 kg/L
Storage / shelf life
At least 6 months unopened when stored dry, shaded at +5 °C to +35 °C
Theoretical yield
Approximately 20 L of mixed mortar per 40 kg set
Water-tightness / negative pressure
No penetration reported; 5 bar for 72 h

FAQ

KREVO Proof Cem-Flex: questions

What is KREVO Proof Cem-Flex?

KREVO Proof Cem-Flex is a two-component, polymer-modified cementitious waterproofing slurry supplied as a pre-measured liquid-polymer and cementitious-powder set. Mixed to a homogeneous grey slurry, the material is designed to waterproof and damp-proof sound concrete, mortar and masonry surfaces in below-grade and exposed construction applications.

What is KREVO Proof Cem-Flex used for?

KREVO Proof Cem-Flex is used for: basements and retaining walls; water tanks and swimming pools; flat roofs, balconies and terraces; bridges and sea walls; tunnels; waterproofing of concrete, mortar, brickwork and suitably prepared steel.

What pack sizes is KREVO Proof Cem-Flex available in?

KREVO Proof Cem-Flex is supplied in 30 kg set: 10 kg Part A liquid + 30 kg Part B powder.

What is the shelf life of KREVO Proof Cem-Flex?

Shelf life / storage: At least 6 months unopened when stored dry, shaded at +5 °C to +35 °C.

Is there a technical data sheet for KREVO Proof Cem-Flex?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Proof Cem-Flex