Skip to content
Krevo
KREVO Bond Cem-EP
Concrete Repair

KREVO Bond Cem-EP

Epoxy-cement bonding primer · Reinforcement corrosion protection · Three-component system

Type
Cem Epoxy Bonding Agent
Pack sizes
20 kg complete matched three-component unit
Coverage
2.0 kg/m² per 1 mm coat
Shelf life
Dry, cool, unopened original packs at +5 °C to +25 °C
Technical data sheet

Overview

KREVO Bond Cem-EP is a three-component, epoxy-modified cementitious coating incorporating selected mineral fillers and a corrosion inhibitor. The system is designed as a bonding primer for concrete repair and as a protective coating for exposed reinforcing steel. It provides an intermediate layer between prepared substrate and compatible repair materials.

Advantages

  • Combines epoxy-modified bonding performance with cementitious application characteristics.
  • Designed for strong adhesion to prepared concrete and reinforcement steel.
  • Incorporates corrosion inhibitor and limits water and chloride penetration.
  • Extended working and overlay periods for compatible repair mortar placement.
  • Brush or spray application; suitable for hot and tropical project conditions.

Typical uses

  • Corrosion protection to exposed reinforcing bars
  • Bonding coat on existing concrete before repair
  • Repair of RCC beams, columns and slabs
  • Structural patching and rehabilitation
  • Reinforcement treatment in industrial and marine structures

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Material type
Three-component, epoxy-modified cementitious protective/bonding coating
Composition
Portland cement, epoxy resin, selected aggregates and additives
Kit composition
20 kg set: A = 3 kg, B = 2 kg, C = 15 kg
Appearance / colour
A: white liquid; B: yellowish liquid; C: grey powder; mixed: dark grey
Mixed density
Approximately 2.0 kg/L at +23 °C
Storage
Dry, cool, unopened original packs at +5 °C to +25 °C
Shelf life
12 months when correctly stored
Tensile adhesion | BS 1881-207
≥ 1.5 MPa at 28 days, or concrete failure
Shear adhesion | ASTM C881
Pass - bonding primer, fresh-to-hardened concrete
Corrosion protection | EN 15183
Pass - qualification criterion
Reinforcement protection | EN 1504-7
System design / conformity requirement
Rebar coating consumption
2.0 kg/m² per 1 mm coat
Rebar protection thickness
Two coats, approximately 1 mm each
Concrete bonding coat consumption
Approximately 1.5-2.0 kg/m²/mm; depends on substrate
Bonding layer thickness
At least 0.5 mm, fully brushed into surface pores
Mixed system pot life | +20 °C
3 hours

FAQ

KREVO Bond Cem-EP: questions

What is KREVO Bond Cem-EP?

KREVO Bond Cem-EP is a three-component, epoxy-modified cementitious coating incorporating selected mineral fillers and a corrosion inhibitor. The system is designed as a bonding primer for concrete repair and as a protective coating for exposed reinforcing steel. It provides an intermediate layer between prepared substrate and compatible repair materials.

What is KREVO Bond Cem-EP used for?

KREVO Bond Cem-EP is used for: corrosion protection to exposed reinforcing bars; bonding coat on existing concrete before repair; repair of RCC beams, columns and slabs; structural patching and rehabilitation; reinforcement treatment in industrial and marine structures.

What pack sizes is KREVO Bond Cem-EP available in?

KREVO Bond Cem-EP is supplied in 20 kg complete matched three-component unit.

What is the coverage of KREVO Bond Cem-EP?

Coverage / consumption: 2.0 kg/m² per 1 mm coat. Actual consumption depends on the substrate and application; see the technical data sheet.

What is the shelf life of KREVO Bond Cem-EP?

Shelf life / storage: Dry, cool, unopened original packs at +5 °C to +25 °C.

Is there a technical data sheet for KREVO Bond Cem-EP?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Bond Cem-EP