KREVO Grout EP
High-temperature, high-strength epoxy grout · Heavy static & dynamic loads · Up to 120 mm
- Type
- Epoxy Grout
- Pack sizes
- 90.1 kg complete set: 1 resin pail + 1 hardener tin + 3 filler bags
- Shelf life
- 18 months in dry, sealed storage at approximately +20 °C
Overview
KREVO Grout EP is a solvent-free, epoxy resin-based, high-strength precision grout developed for machinery bases and structural supports subjected to demanding static and dynamic loads. Its dense cross-linked resin system is designed for elevated-temperature service and resistance to aggressive industrial environments. The resin, hardener and graded filler are combined to form a flowable grout; filler proportion may be adjusted to achieve the required handling consistency under an approved mix design.
Advantages
- High early compressive strength helps reduce equipment shutdown periods.
- Designed for heavy, repetitive and dynamic loading with strong adhesion to prepared surfaces.
- High flexural strength, dimensional stability and low-creep design for precision support.
- Specified operating-temperature range from −40 °C to +160 °C, subject to system qualification.
- Good resistance to selected inorganic acids, organic acids, oils and hydrocarbons.
Typical uses
- High-speed turbines and centrifuges
- Crane and transporter rail supports
- Reciprocating machinery
- Drop forges
- Heavy equipment foundations and base plates
- Static and dynamically loaded industrial support systems
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Grout EP
69 MPa
Compressive strength | ASTM C579, 16 h at +40 °C
90 MPa
Compressive strength | ASTM C579, 24 h at +40 °C
110 MPa
Compressive strength | ASTM C579, 48 h at +40 °C
> 45 MPa
Flexural strength | ASTM C580
> 10 MPa
Tensile strength | ASTM C307
20 × 10⁻⁶ / °C
Thermal expansion coefficient | ASTM C531
Product information
- Material type
- Solvent-free epoxy resin / hardener / graded-filler grout
- Formulation
- High-density cross-linked epoxy; adjustable filler proportion
- Appearance / colour
- Dark brown
- Recommended grout depth
- Up to 120 mm, subject to approved placement and thermal design
- Specified service temperature
- −40 °C to +160 °C after full cure; qualification required
- Theoretical yield
- Approximately 45 litres per complete 90.1 kg set
- Storage / shelf life
- 18 months in dry, sealed storage at approximately +20 °C
- Compressive strength | ASTM C579, 72 / 96 h at +40 °C
- 110 MPa
- Impact resistance
- Greater than concrete (qualitative criterion)
FAQ
KREVO Grout EP: questions
What is KREVO Grout EP?
KREVO Grout EP is a solvent-free, epoxy resin-based, high-strength precision grout developed for machinery bases and structural supports subjected to demanding static and dynamic loads. Its dense cross-linked resin system is designed for elevated-temperature service and resistance to aggressive industrial environments. The resin, hardener and graded filler are combined to form a flowable grout;…
What is KREVO Grout EP used for?
KREVO Grout EP is used for: high-speed turbines and centrifuges; crane and transporter rail supports; reciprocating machinery; drop forges; heavy equipment foundations and base plates; static and dynamically loaded industrial support systems.
What pack sizes is KREVO Grout EP available in?
KREVO Grout EP is supplied in 90.1 kg complete set: 1 resin pail + 1 hardener tin + 3 filler bags.
What is the shelf life of KREVO Grout EP?
Shelf life / storage: 18 months in dry, sealed storage at approximately +20 °C.
Is there a technical data sheet for KREVO Grout EP?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Concrete Repair
Repair Mortar
Concrete Repair
KREVO Repair Mortar
High-strength fibre-reinforced repair mortar · Shrinkage-compensated · Structural concrete restoration
View product
Non Shrink Grout
Concrete Repair
KREVO Grout NS
Shrinkage-compensated cementitious precision grout · Free-flowing, high-strength · 10-50 mm
View product
Micro Concrete
Concrete Repair
KREVO Repair MicroConcrete
Free-flowing high-strength cementitious micro-concrete · Non-shrink repair and grouting · 50-500 mm
View product