KREVO Floor EP-Screed
High-strength, load-bearing trowelable epoxy screed · Three-component system · 4-20 mm
- Type
- Epoxy Screed
- Pack sizes
- 12 L pack (component arrangement to be confirmed)
- Shelf life
- 18 months in sealed original containers stored dry below +35 °C
Overview
KREVO Floor EP-Screed is specified as a high-strength, trowel-applied epoxy mortar made from resin, hardener and graded mineral aggregate. It is intended as a tough load-bearing and levelling base layer for subsequent resin floor coatings or toppings, with resistance to mechanical impact and industrial chemical exposure.
Advantages
- Dense, hard-wearing, high-strength industrial epoxy screed.
- Suitable for levelling and repairing uneven concrete before finishing coats.
- Trowelable mortar construction permits local thickness build-up.
- Designed for durable service where impact, wear and chemical exposure are expected.
- Low-VOC and formaldehyde-free composition are formulation targets requiring confirmation.
Typical uses
- Industrial and processing floors
- Load-bearing floor resurfacing
- Depressions and local repairs
- Levelling under epoxy flooring systems
- Substrate build-up prior to chemical-resistant protective coatings
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Floor EP-Screed
4-20 mm
Designed installed thickness
0 to +65 °C
Service temperature
< 10 g/L
VOC specification
> 65 N/mm² at 7 days
Compressive strength | BS 6319
> 15 N/mm² at 7 days
Flexural strength | BS 6319
> 10 N/mm² at 7 days
Tensile strength | BS 6319
Product information
- Material type
- Three-component epoxy resin / hardener / graded aggregate mortar
- Application method
- Trowel or screed box; subsequent compatible resin floor finish
- Shelf life
- 18 months in sealed original containers stored dry below +35 °C
- Theoretical yield at 5 mm
- 2.8 m² per pack, subject to pack-yield and site verification
- Water absorption | BS 1881
- Nil
FAQ
KREVO Floor EP-Screed: questions
What is KREVO Floor EP-Screed?
KREVO Floor EP-Screed is specified as a high-strength, trowel-applied epoxy mortar made from resin, hardener and graded mineral aggregate. It is intended as a tough load-bearing and levelling base layer for subsequent resin floor coatings or toppings, with resistance to mechanical impact and industrial chemical exposure.
What is KREVO Floor EP-Screed used for?
KREVO Floor EP-Screed is used for: industrial and processing floors; load-bearing floor resurfacing; depressions and local repairs; levelling under epoxy flooring systems; substrate build-up prior to chemical-resistant protective coatings.
What pack sizes is KREVO Floor EP-Screed available in?
KREVO Floor EP-Screed is supplied in 12 L pack (component arrangement to be confirmed).
What is the shelf life of KREVO Floor EP-Screed?
Shelf life / storage: 18 months in sealed original containers stored dry below +35 °C.
Is there a technical data sheet for KREVO Floor EP-Screed?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Floor Solutions
PU SL
Floor Solutions
KREVO Floor PU-SL
Self-leveling Urethane Hybrid Flooring · Flow-applied floor topping
View product
PU Screed
Floor Solutions
KREVO Floor PU-Screed
Heavy-duty polyurethane-cement floor screed · Hygienic, slip-resistant finish · 6-12 mm
View product
Epoxy SL
Floor Solutions
KREVO Floor EP-SL
Abrasion- and chemical-resistant self-leveling epoxy flooring · Three-component system · 1–4 mm
View product