KREVO Grout NS
Shrinkage-compensated cementitious precision grout · Free-flowing, high-strength · 10-50 mm
- Type
- Non Shrink Grout
- Pack sizes
- 40 kg bag
- Shelf life
- Original unopened bags; dry and shaded, +5 °C to +35 °C
Overview
KREVO Grout NS is a one-component, cementitious, shrinkage-compensated, free-flowing precision grout manufactured from Portland cement, selected aggregates, fillers and special additives. The grey powder is mixed with clean water to achieve a dry-pack, plastic or highly flowable consistency for grouting and structural support in industrial and civil works.
Advantages
- Single-component dry material; requires only measured clean water.
- Designed for good flow and adjustable placement consistency.
- Shrinkage-compensated formulation with high early and ultimate strength.
- Non-corrosive and iron-free for precision grouting applications.
- Suitable for warm and tropical jobsite conditions when properly handled.
Typical uses
- Base plates and machine foundations
- Bridge bearing pads
- Precast column connections
- Grouting of anchor bolts and recesses
- Voids, gaps and cavities in concrete
- General concrete grouting and localized repair
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Grout NS
4 mm
Maximum aggregate size
≥ 30 MPa
Compressive strength | 1 day
≥ 45 MPa
Compressive strength | 3 days
≥ 55 MPa
Compressive strength | 7 days
≥ 65 MPa
Compressive strength | 28 days
35,000 N/mm²
Compressive modulus of elasticity
+0.08%
Length change / expansion | 28 days
Product information
- Product type
- Single-component, cementitious non-shrink precision grout
- Chemical base
- Portland cement, selected mineral fillers, aggregates and additives
- Appearance / colour
- Grey powder; cementitious grout after water addition
- Typical yield
- Approximately 20 L per 40 kg bag, depending on water addition
- Storage conditions
- Original unopened bags; dry and shaded, +5 °C to +35 °C
- Shelf life
- Minimum 6 months from manufacture under specified storage
- Tensile adhesion | BS 1881
- ≥ 1.15 (source unit requires confirmation)
- Thermal expansion coefficient
- Approximately 11 × 10⁻⁶ /°C
- Specified standard framework
- ASTM C1107 Type C; CRD-C621-83-10.2
FAQ
KREVO Grout NS: questions
What is KREVO Grout NS?
KREVO Grout NS is a one-component, cementitious, shrinkage-compensated, free-flowing precision grout manufactured from Portland cement, selected aggregates, fillers and special additives. The grey powder is mixed with clean water to achieve a dry-pack, plastic or highly flowable consistency for grouting and structural support in industrial and civil works.
What is KREVO Grout NS used for?
KREVO Grout NS is used for: base plates and machine foundations; bridge bearing pads; precast column connections; grouting of anchor bolts and recesses; voids, gaps and cavities in concrete; general concrete grouting and localized repair.
What pack sizes is KREVO Grout NS available in?
KREVO Grout NS is supplied in 40 kg bag.
What is the shelf life of KREVO Grout NS?
Shelf life / storage: Original unopened bags; dry and shaded, +5 °C to +35 °C.
Is there a technical data sheet for KREVO Grout NS?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Concrete Repair
Repair Mortar
Concrete Repair
KREVO Repair Mortar
High-strength fibre-reinforced repair mortar · Shrinkage-compensated · Structural concrete restoration
View product
Micro Concrete
Concrete Repair
KREVO Repair MicroConcrete
Free-flowing high-strength cementitious micro-concrete · Non-shrink repair and grouting · 50-500 mm
View product
High Strength Non Shrink Grout
Concrete Repair
KREVO Grout HS
High-strength, shrinkage-compensated precision grout · Controlled expansion · 30-150 mm
View product