KREVO Repair Mortar
High-strength fibre-reinforced repair mortar · Shrinkage-compensated · Structural concrete restoration
- Type
- Repair Mortar
- Pack sizes
- 40 kg bags
- Shelf life
- Dry and shaded below +35 °C / 12 months
See it applied
Rebuilding a damaged column
How KREVO Repair Mortar goes on site, step by step.
- 1 Break out damaged concrete
- 2 Trowel in the repair mortar
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Repair Mortar is a single-component, high-strength cementitious repair mortar formulated with selected cement, graded aggregates, fibres and performance additives. The shrinkage-compensated system is designed for durable reinstatement of damaged concrete and enhanced resistance to carbonation, chloride ingress, sulphate attack and freeze-thaw exposure.
Advantages
- High bond strength and dense, low-permeability repair matrix.
- Shrinkage-compensated formulation to limit drying shrinkage.
- High early strength and 70 MPa compressive strength target at 28 days.
- Fibre reinforcement and resistance to freeze-thaw exposure.
- Single-component dry powder: mix with the specified quantity of clean water.
Typical uses
- Parking structures
- Floor, deck and slab repairs
- Columns and walls
- Water and wastewater tanks
- Bridges, tunnels and dams
- Marine and industrial concrete structures
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Repair Mortar
< 10 g/L
Volatile organic content (VOC)
70 MPa at 28 days
Compressive strength | ASTM C109
10 MPa at 28 days
Flexural strength | ASTM C580
40 MPa at 28 days
Slant-shear bond | ASTM C882
8–12 mm, unsupported
Vertical application thickness
Product information
- Material type
- Single-component, fibre-reinforced, cementitious repair mortar
- Composition
- Selected cement, graded aggregates, fibres and additives
- Appearance
- Grey dry powder; add clean potable water
- Yield
- Approximately 20 litres per 40 kg bag
- Storage / shelf life
- Dry and shaded below +35 °C / 12 months
- Specified mix water
- Approx. 4.75 L per 40 kg bag; confirm bag instructions
- Structural repair classification | EN 1504-3
- Class R4 design criterion
- Laboratory water / powder ratio
- 0.11 by mass (reference test condition)
- VOC level
- < 10 g/L
- Formed / horizontal thickness
- Up to 25 mm without aggregate extension
- Horizontal thickness with aggregate
- Up to 100 mm, subject to approved mix design
Used together with
Concrete repair and strengthening system
KREVO Repair Mortar is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.
-
1Bonding coat
-
2Repair mortar
KREVO Repair Mortar
This product
-
3Carbon fibre wrap
-
4Protective top coat
FAQ
KREVO Repair Mortar: questions
What is KREVO Repair Mortar?
KREVO Repair Mortar is a single-component, high-strength cementitious repair mortar formulated with selected cement, graded aggregates, fibres and performance additives. The shrinkage-compensated system is designed for durable reinstatement of damaged concrete and enhanced resistance to carbonation, chloride ingress, sulphate attack and freeze-thaw exposure.
What is KREVO Repair Mortar used for?
KREVO Repair Mortar is used for: parking structures; floor, deck and slab repairs; columns and walls; water and wastewater tanks; bridges, tunnels and dams; marine and industrial concrete structures.
How is KREVO Repair Mortar applied?
In outline: 1. Break out damaged concrete 2. Trowel in the repair mortar. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Repair Mortar available in?
KREVO Repair Mortar is supplied in 40 kg bags.
What is the shelf life of KREVO Repair Mortar?
Shelf life / storage: Dry and shaded below +35 °C / 12 months.
Is there a technical data sheet for KREVO Repair Mortar?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Concrete Repair
Non Shrink Grout
Concrete Repair
KREVO Grout NS
Shrinkage-compensated cementitious precision grout · Free-flowing, high-strength · 10-50 mm
View product
Micro Concrete
Concrete Repair
KREVO Repair MicroConcrete
Free-flowing high-strength cementitious micro-concrete · Non-shrink repair and grouting · 50-500 mm
View product
High Strength Non Shrink Grout
Concrete Repair
KREVO Grout HS
High-strength, shrinkage-compensated precision grout · Controlled expansion · 30-150 mm
View product