Skip to content
Krevo
KREVO Mix Silica
Concrete Admix

KREVO Mix Silica

Silica-fume mineral admixture · Dense, durable concrete · Improved cohesion & impermeability

Type
Silica Fume
Pack sizes
25 kg bags and 1,000 kg jumbo bags
Shelf life
36 months in original sealed, properly stored packaging
Technical data sheet

Overview

KREVO Mix Silica is a powdered mineral addition based on silica-fume technology for high-performance cementitious mixes. Extremely fine reactive silica contributes to improved cohesion and retention of water in fresh concrete. During hardening, it reacts with calcium hydroxide to form additional cementitious hydration products, refining the pore structure and helping achieve a denser concrete matrix.

Advantages

  • Improves cohesion, stability and pumpability of fresh concrete and shotcrete.
  • Promotes higher ultimate strength and longer-term durability.
  • Improves resistance to abrasion and reduces water and gas permeability.
  • Helps reduce chloride ingress in durable reinforced-concrete mixes.
  • Supports frost and de-icing salt resistance with suitable air entrainment.

Typical uses

  • Shotcrete
  • Structural and high-strength concrete
  • Precast concrete elements
  • Pumped and slick-line concrete
  • Water-retaining structures
  • Marine and infrastructure works
  • Concrete requiring enhanced durability or resistance to chloride penetration

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Generic type
Fine powdered silica-fume mineral admixture for concrete
Composition
Blend of fine, latently reactive silica-based ingredients
Appearance / colour
Grey powder
Bulk density
0.65 kg/L
Total chloride ion content
Less than 0.3 mass-% (technical basis)
Shelf life
36 months in original sealed, properly stored packaging
Storage conditions
Keep in dry conditions; protect from moisture
Recommended dosage
5–10% by weight of cement; establish by trials
Fresh-concrete behaviour
Improved cohesion, stability and water retention
Hardened-concrete response
Higher ultimate strength; denser cement matrix
Durability contribution
Lower permeability and chloride penetration
Abrasion / gas resistance
Improved abrasion resistance and gas tightness
Frost / de-icing salts
Benefits with suitable air-entraining system
Batching / wet mixing
Add with cement and aggregates; wet mix ~60 seconds
Standard reference
EN 13263-1:2005 Table 4; confirm KREVO compliance

FAQ

KREVO Mix Silica: questions

What is KREVO Mix Silica?

KREVO Mix Silica is a powdered mineral addition based on silica-fume technology for high-performance cementitious mixes. Extremely fine reactive silica contributes to improved cohesion and retention of water in fresh concrete. During hardening, it reacts with calcium hydroxide to form additional cementitious hydration products, refining the pore structure and helping achieve a denser concrete…

What is KREVO Mix Silica used for?

KREVO Mix Silica is used for: shotcrete; structural and high-strength concrete; precast concrete elements; pumped and slick-line concrete; water-retaining structures; marine and infrastructure works; concrete requiring enhanced durability or resistance to chloride penetration.

What pack sizes is KREVO Mix Silica available in?

KREVO Mix Silica is supplied in 25 kg bags and 1,000 kg jumbo bags.

What is the shelf life of KREVO Mix Silica?

Shelf life / storage: 36 months in original sealed, properly stored packaging.

Is there a technical data sheet for KREVO Mix Silica?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Mix Silica