KREVO Carbon Bond EP
High-strength thixotropic epoxy adhesive · CFRP strip and plate bonding · Standard & Slow grades
- Type
- Strip Adhesive
- Pack sizes
- 5 Kg complete packs
- Coverage
- 1 L/m² at a 1 mm nominal adhesive thickness
- Shelf life
- 12 months in sealed packs, dry and shaded below +35 °C
Overview
KREVO Carbon Bond EP is a high-build, high-strength, thixotropic epoxy bonding system intended for externally bonded carbon-fiber strips, plates and rods and other approved reinforcing materials. Its non-sag consistency supports durable bonding of structural strengthening components on horizontal and vertical substrates.
Advantages
- High-strength, non-slump epoxy adhesive for structural strengthening work.
- Suitable for bonding CFRP strips, pultruded plates and compatible rods.
- Designed for direct application to properly prepared concrete without a separate primer.
- Formulated for good adhesion and resistance to a broad range of chemicals.
- Standard and Slow application grades for differing site conditions.
Typical uses
- Externally bonded CFRP strips and plates
- Bonding carbon-fiber rods to concrete
- Bonding external steel-plate reinforcement
- Structural rehabilitation of beams, slabs and columns
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Carbon Bond EP
90 MPa
Compressive strength
23 MPa
Tensile strength
50 MPa
Flexural strength
7 GPa
Compressive modulus
10 GPa
Tensile modulus
33 × 10⁻⁶ /°C
Coefficient of thermal expansion
>18 MPa
Single-lap shear strength
0.4% / >65 °C
Water absorption / Tg (DMTA)
Product information
- Material type
- Two-component, high-build, thixotropic epoxy adhesive
- Intended use
- Structural bonding of CFRP strips / plates / rods and approved steel plates
- Grades
- Standard | Slow
- Material consistency
- Non-sag, high-strength epoxy bonding paste
- Application range
- Standard: +5 to +30 °C | Slow: +15 to +45 °C*
- Theoretical consumption
- 1 L/m² at a 1 mm nominal adhesive thickness
- Shelf life / storage
- 12 months in sealed packs, dry and shaded below +35 °C
FAQ
KREVO Carbon Bond EP: questions
What is KREVO Carbon Bond EP?
KREVO Carbon Bond EP is a high-build, high-strength, thixotropic epoxy bonding system intended for externally bonded carbon-fiber strips, plates and rods and other approved reinforcing materials. Its non-sag consistency supports durable bonding of structural strengthening components on horizontal and vertical substrates.
What is KREVO Carbon Bond EP used for?
KREVO Carbon Bond EP is used for: externally bonded CFRP strips and plates; bonding carbon-fiber rods to concrete; bonding external steel-plate reinforcement; structural rehabilitation of beams, slabs and columns.
What pack sizes is KREVO Carbon Bond EP available in?
KREVO Carbon Bond EP is supplied in 5 Kg complete packs.
What is the coverage of KREVO Carbon Bond EP?
Coverage / consumption: 1 L/m² at a 1 mm nominal adhesive thickness. Actual consumption depends on the substrate and application; see the technical data sheet.
What is the shelf life of KREVO Carbon Bond EP?
Shelf life / storage: 12 months in sealed packs, dry and shaded below +35 °C.
Is there a technical data sheet for KREVO Carbon Bond EP?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in CFRP Systems
CFRP Fibre Wrap
CFRP Systems
KREVO Carbon Fabric
High-StrengthUunidirectional Carbon Fibre Fabric · Structural strengthening
View product
Wrap Adhesive
CFRP Systems
KREVO Carbon Lamination EP
Solvent-free, Epoxy lamination resin · Carbon-fibre fabric impregnation
View product
CFRP Strip
CFRP Systems
KREVO Carbon Strip
High-Strength pultruded CFRP strengthening strip · HS, IM and HM grades |
View product