KREVO Seal PS-PG
Two-component pourable polysulphide joint sealant · Self-levelling · Horizontal joints
- Type
- PU Sealant PG
- Pack sizes
- 4 L set, Part A + Part B
- Shelf life
- Original sealed pack; dry, shaded, +5 °C to +30 °C
See it applied
Pouring a joint sealant
How KREVO Seal PS-PG goes on site, step by step.
- 1 Pour into the joint
- 2 Self-levelling finish
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Seal PS-PG is a two-component, cross-linking polysulphide-based elastomeric sealant developed for horizontal expansion and connection joints in civil engineering and building works. The mixed material is pourable and self-levelling, forming a permanently elastic joint seal suitable for hot and tropical site conditions when correctly installed.
Advantages
- Pourable, self-levelling consistency for horizontal expansion joints.
- Permanent elasticity with nominal movement accommodation of ±25%.
- Good adhesion to properly prepared concrete and suitable construction substrates.
- Weather resistance and resistance to selected oils, fuels and diluted chemicals.
- Two-component system with straightforward mixing and economical installation.
Typical uses
- Expansion joints in industrial and warehouse floors
- Concrete pavement and precast joints
- Bridge-deck joints
- Reservoirs
- Car parks, roads and airport pavements
- Vacuum-dewatered floor joints
- Horizontal trafficable joints and grooves
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Seal PS-PG
1.60 kg/L
Mixed density
Approximately 20
Shore A hardness | ASTM C661
±25%
Movement capability | ASTM C719
-20 °C to +80 °C
Service temperature
Product information
- Chemical base
- Two-component, cross-linking polysulphide
- Consistency / colour
- Self-levelling, pourable; grey paste
- Solids content
- 100% (reference criterion)
- Application orientation
- Horizontal movement and connection joints
- Storage conditions
- Original sealed pack; dry, shaded, +5 °C to +30 °C
- Shelf life
- 12 months under the specified storage conditions
- VOC | US EPA Method 24
- 0 g/L (reference specification)
- Product classification target
- ASTM C920 Type M, Grade P, Class 25
- Other standards target
- BS 4254; BS / EN ISO 11600
FAQ
KREVO Seal PS-PG: questions
What is KREVO Seal PS-PG?
KREVO Seal PS-PG is a two-component, cross-linking polysulphide-based elastomeric sealant developed for horizontal expansion and connection joints in civil engineering and building works. The mixed material is pourable and self-levelling, forming a permanently elastic joint seal suitable for hot and tropical site conditions when correctly installed.
What is KREVO Seal PS-PG used for?
KREVO Seal PS-PG is used for: expansion joints in industrial and warehouse floors; concrete pavement and precast joints; bridge-deck joints; reservoirs; car parks, roads and airport pavements; vacuum-dewatered floor joints; horizontal trafficable joints and grooves.
How is KREVO Seal PS-PG applied?
In outline: 1. Pour into the joint 2. Self-levelling finish. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Seal PS-PG available in?
KREVO Seal PS-PG is supplied in 4 L set, Part A + Part B.
What is the shelf life of KREVO Seal PS-PG?
Shelf life / storage: Original sealed pack; dry, shaded, +5 °C to +30 °C.
Is there a technical data sheet for KREVO Seal PS-PG?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Waterproofing
Cementitious Coating
Waterproofing
KREVO Proof Cem-Flex
Two-component polymer-modified cementitious waterproofing slurry · Brush or trowel applied
View product
Polyurethane Acrylic
Waterproofing
KREVO Proof PU-Acryl
One-component polyurethane-acrylic liquid waterproofing membrane · UV-resistant roof coating
View product
Acrylic Coating
Waterproofing
KREVO Proof Acryl
Flexible single-component acrylic waterproofing membrane · UV- and weather-resistant roof coating
View product