Skip to content
Krevo
KREVO Carbon Fabric
CFRP Systems

KREVO Carbon Fabric

High-StrengthUunidirectional Carbon Fibre Fabric · Structural strengthening

Type
CFRP Fibre Wrap
Pack sizes
500 mm × 100 m rolls
Technical data sheet

See it applied

Wrapping a column with carbon fibre

How KREVO Carbon Fabric goes on site, step by step.

  1. 1 Saturate with lamination epoxy
  2. 2 Wrap the carbon fabric

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Carbon Wrap C-300 is described here as a high-strength unidirectional carbon fibre sheet intended for use as externally bonded reinforcement to structural members. Applied with a compatible Krevo Prime EP and Krevo Carbon lamination EP, the fabric is used for strengthening against tensile, shear and impact forces. The fabric is black in colour.

Advantages

  • Lightweight and easy to apply.
  • Simple application to square or curved members.
  • High strength-to-weight ratio.
  • For impact- and blast-resistance strengthening applications, subject to engineering design.
  • May be used with pultruded CFRP plates for combined strengthening and reinforcement.

Typical uses

  • External reinforcement for structural strengthening of beams
  • columns
  • slabs
  • tunnels
  • circular, curved and complicated structural details

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Carbon Fabric

300 g/m²

Fabric sheet weight

98%

Carbon content

0.166 mm

Net effective thickness

240 GPa

Modulus of elasticity

4,000 MPa

Tensile strength

2%

Elongation at break

Product information

Material type
Unidirectional carbon fibre reinforcement fabric
Appearance
Black

Used together with

Concrete repair and strengthening system

KREVO Carbon Fabric is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Bonding coat

  2. 2Repair mortar

  3. 3Carbon fibre wrap

    KREVO Carbon Lamination EP Wrap Adhesive KREVO Carbon Fabric This product
  4. 4Protective top coat

FAQ

KREVO Carbon Fabric: questions

What is KREVO Carbon Fabric?

KREVO Carbon Wrap C-300 is described here as a high-strength unidirectional carbon fibre sheet intended for use as externally bonded reinforcement to structural members. Applied with a compatible Krevo Prime EP and Krevo Carbon lamination EP, the fabric is used for strengthening against tensile, shear and impact forces. The fabric is black in colour.

What is KREVO Carbon Fabric used for?

KREVO Carbon Fabric is used for: external reinforcement for structural strengthening of beams; columns; slabs; tunnels; circular, curved and complicated structural details.

How is KREVO Carbon Fabric applied?

In outline: 1. Saturate with lamination epoxy 2. Wrap the carbon fabric. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Carbon Fabric available in?

KREVO Carbon Fabric is supplied in 500 mm × 100 m rolls.

Is there a technical data sheet for KREVO Carbon Fabric?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Carbon Fabric