Skip to content
Krevo
KREVO Bond EP
Concrete Repair

KREVO Bond EP

Solvent-free epoxy bonding agent · Fresh-to-hardened concrete bonding · Reinforcement protection

Type
Epoxy Bonding Agent
Pack sizes
5 Kg complete packs; 2 US-gallon packs where supplied
Coverage
Approximately 5 m²/L per coat, substrate-dependent
Shelf life
18 months in dry, shaded conditions below +35 °C
Technical data sheet

See it applied

Bonding coat on a repaired column

How KREVO Bond EP goes on site, step by step.

  1. 1 Clean the steel and concrete
  2. 2 Brush on the bonding coat

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Bond EP is a two-component, solvent-free epoxy bonding agent for bonding freshly placed concrete or repair mortar to sound hardened concrete and prepared steel. The epoxy system may also be used as a protective primer on reinforcing steel and as a water-resistant barrier to chloride ingress in concrete repair works.

Advantages

  • Strong adhesion to prepared concrete and steel substrates.
  • Solvent-free epoxy formulation with a long working and overlay time.
  • Designed to resist chloride penetration and moisture ingress.
  • Suitable for reinforcement corrosion protection and concrete repair priming.
  • Brush-applied coating for horizontal and vertical surfaces.

Typical uses

  • Bonding fresh concrete to existing concrete
  • Fresh concrete-to-steel bonding
  • Primer for cementitious concrete repair mortars
  • Reinforcing steel protection
  • Anti-chloride barrier in repair and rehabilitation works

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Bond EP

< 50 g/L

Volatile organic content (VOC)

60 MPa

Compressive strength

20 MPa

Tensile strength

30 MPa

Flexural strength

25 MPa

Slant-shear strength

+5 °C to +35 °C

Application temperature

6 hours / 3 hours

Pot life at +20 °C / +30 °C

24 hours / 12 hours

Maximum overlay at +20 °C / +30 °C

Product information

Material type
Two-component, solvent-free epoxy bonding resin
Composition
Epoxy resin with acid-resistant fillers and wetting agents
Appearance
Two-component base and hardener; uniform mixed coating
Theoretical coverage
Approximately 5 m²/L per coat, substrate-dependent
Storage / shelf life
18 months in dry, shaded conditions below +35 °C
Main applications
Concrete bonding, steel corrosion protection and anti-chloride priming
VOC level
< 50 g/L

Used together with

Concrete repair and strengthening system

KREVO Bond EP is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.

  1. 1Bonding coat

    KREVO Bond EP This product
  2. 2Repair mortar

  3. 3Carbon fibre wrap

  4. 4Protective top coat

FAQ

KREVO Bond EP: questions

What is KREVO Bond EP?

KREVO Bond EP is a two-component, solvent-free epoxy bonding agent for bonding freshly placed concrete or repair mortar to sound hardened concrete and prepared steel. The epoxy system may also be used as a protective primer on reinforcing steel and as a water-resistant barrier to chloride ingress in concrete repair works.

What is KREVO Bond EP used for?

KREVO Bond EP is used for: bonding fresh concrete to existing concrete; fresh concrete-to-steel bonding; primer for cementitious concrete repair mortars; reinforcing steel protection; anti-chloride barrier in repair and rehabilitation works.

How is KREVO Bond EP applied?

In outline: 1. Clean the steel and concrete 2. Brush on the bonding coat. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Bond EP available in?

KREVO Bond EP is supplied in 5 Kg complete packs; 2 US-gallon packs where supplied.

What is the coverage of KREVO Bond EP?

Coverage / consumption: Approximately 5 m²/L per coat, substrate-dependent. Actual consumption depends on the substrate and application; see the technical data sheet.

What is the shelf life of KREVO Bond EP?

Shelf life / storage: 18 months in dry, shaded conditions below +35 °C.

Is there a technical data sheet for KREVO Bond EP?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Bond EP