Skip to content
Krevo
KREVO Seal PU-GG
Waterproofing

KREVO Seal PU-GG

High-performance polyurethane civil engineering joint sealant · One component · Elastic, non-sag

Type
PU Sealant GG
Pack sizes
600 mL foil pack; 20 packs per box
Shelf life
Original sealed packs; dry, shaded, +5 °C to +25 °C
Technical data sheet

See it applied

Sealing glass facade joints

How KREVO Seal PU-GG goes on site, step by step.

  1. 1 Clean the joints
  2. 2 Gun-apply the sealant

Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.

Overview

KREVO Seal PU-GG is a one-component, moisture-curing, elastic polyurethane sealant intended for movement and connection joints in heavy-duty civil and industrial environments. The system combines joint movement accommodation with mechanical durability and resistance to selected service chemicals. It is suitable for horizontal and vertical joint sealing when substrates and joint geometry are properly prepared.

Advantages

  • Elastic joint sealing with a nominal movement capability of ±35%.
  • Good adhesion to prepared concrete, masonry and a range of construction substrates.
  • Resistant to water, seawater and certain diluted chemicals, diesel and jet fuel.
  • Non-sag, single-component material for floor, vertical and overhead joints.
  • Solvent-free, low-emission formulation intended for demanding service conditions.

Typical uses

  • Industrial and warehouse floors
  • Traffic and pedestrian areas
  • Parking decks
  • Production areas
  • Civil engineering movement and connection joints
  • Sewage treatment plants
  • Tunnels
  • Vertical and overhead construction joints

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Seal PU-GG

1.35 kg/L

Density

-40 °C to +70 °C

Service temperature

37 (28 days)

Shore A hardness | ISO 868

600%

Elongation at break | ISO 37

90%

Elastic recovery | ISO 7389

8 N/mm

Tear propagation resistance | ISO 34

±35%

Movement capability | ASTM C719

Product information

Material type
One-component, moisture-curing, elastic polyurethane sealant
Appearance / colour
Concrete grey; additional colours subject to availability
Application surfaces
Prepared concrete, masonry and compatible construction materials
Storage
Original sealed packs; dry, shaded, +5 °C to +25 °C
Shelf life
15 months when stored as specified
Secant tensile modulus | ISO 8339
~0.60 MPa at +23 °C; ~1.10 MPa at -20 °C

FAQ

KREVO Seal PU-GG: questions

What is KREVO Seal PU-GG?

KREVO Seal PU-GG is a one-component, moisture-curing, elastic polyurethane sealant intended for movement and connection joints in heavy-duty civil and industrial environments. The system combines joint movement accommodation with mechanical durability and resistance to selected service chemicals. It is suitable for horizontal and vertical joint sealing when substrates and joint geometry are…

What is KREVO Seal PU-GG used for?

KREVO Seal PU-GG is used for: industrial and warehouse floors; traffic and pedestrian areas; parking decks; production areas; civil engineering movement and connection joints; sewage treatment plants; tunnels; vertical and overhead construction joints.

How is KREVO Seal PU-GG applied?

In outline: 1. Clean the joints 2. Gun-apply the sealant. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.

What pack sizes is KREVO Seal PU-GG available in?

KREVO Seal PU-GG is supplied in 600 mL foil pack; 20 packs per box.

What is the shelf life of KREVO Seal PU-GG?

Shelf life / storage: Original sealed packs; dry, shaded, +5 °C to +25 °C.

Is there a technical data sheet for KREVO Seal PU-GG?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Seal PU-GG