Skip to content
Krevo
KREVO Latex
Concrete Repair

KREVO Latex

Water-resistant acrylic bonding agent · Cementitious bonding bridges · Modified repair mortars

Type
SBR
Pack sizes
5 L, 20 L, 200 L
Shelf life
12 months in original unopened packaging
Technical data sheet

Overview

KREVO Latex is a synthetic acrylic dispersion for use in cementitious bonding bridges and site-mixed mortar systems. Blended with suitable cement, sand and gauging water, it improves mortar adhesion, workability and resistance to water penetration. It is intended for bonding slurries, repair mortars and other cement-based construction applications.

Advantages

  • Enhances adhesion between sound concrete substrates and cementitious repairs.
  • Helps reduce shrinkage-related cracking in properly designed mortar mixes.
  • Improves abrasion resistance and reduces cementitious mortar permeability.
  • Supports workable, cohesive, easy-to-apply cement-sand mixes.
  • Suitable for common building substrates after proper surface preparation.

Typical uses

  • Cementitious bonding bridges
  • Patch-repair mortars
  • Grouts and screeds
  • Masonry mortars
  • Plaster and renders
  • Tile-adhesive mortars
  • General cementitious repairs

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Specification

Generic type
Water-resistant acrylic bonding agent and mortar admixture
Chemical base
Synthetic acrylic dispersion
Appearance / colour
White liquid
Specific gravity / pH
1.00 ± 0.02 / pH ≥ 5
Primary function
Cementitious bonding slurry and modified repair mortar
Shelf life
12 months in original unopened packaging
Storage conditions
Sealed and dry, +5 °C to +35 °C; protect from sun and frost
Bonding bridge dilution
KREVO Latex : Water = 1 : 1
Mortar admixture dilution
KREVO Latex : Water = 1 : 1 to 1 : 3
Bonding slurry composition
Diluted Latex plus cement and sand; never dilution alone
Substrate preparation
Clean, sound and pre-wetted; dark-matt without standing water
Bonding bridge application
Brush well into surface pores and irregularities
Subsequent repair mortar
Place wet-on-wet over freshly applied bonding bridge
Mortar mixing
Add gauging liquid to cement-sand blend; mix until smooth
Performance verification
Adhesion and water resistance to be validated for KREVO formulation

FAQ

KREVO Latex: questions

What is KREVO Latex?

KREVO Latex is a synthetic acrylic dispersion for use in cementitious bonding bridges and site-mixed mortar systems. Blended with suitable cement, sand and gauging water, it improves mortar adhesion, workability and resistance to water penetration. It is intended for bonding slurries, repair mortars and other cement-based construction applications.

What is KREVO Latex used for?

KREVO Latex is used for: cementitious bonding bridges; patch-repair mortars; grouts and screeds; masonry mortars; plaster and renders; tile-adhesive mortars; general cementitious repairs.

What pack sizes is KREVO Latex available in?

KREVO Latex is supplied in 5 L, 20 L, 200 L.

What is the shelf life of KREVO Latex?

Shelf life / storage: 12 months in original unopened packaging.

Is there a technical data sheet for KREVO Latex?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Latex