KREVO Floor EP-Coat
Solvent-free high-build epoxy floor coating · Chemical and abrasion resistant · Smooth or anti-slip finish
- Type
- Epoxy Coating
- Pack sizes
- 18 L complete set (specified configuration; confirm supplied unit)
- Shelf life
- 18 months in original sealed containers, dry and shaded, below +30 °C
See it applied
Installing an epoxy floor
How KREVO Floor EP-Coat goes on site, step by step.
- 1 Pour and spread
- 2 Spiked-roller finish
- 3 Completed floor
Illustration of the application process, not footage of a specific project. Follow the technical data sheet for the full method.
Overview
KREVO Floor EP-Coat is specified as a two-component, high-build, solvent-free epoxy coating system designed to produce a dense, durable, decorative finish on prepared concrete floors. The coating provides a protective wearing surface for industrial and commercial environments subject to chemical splashes, mechanical traffic and regular cleaning. It may also be specified for suitable wall substrates.
Advantages
- High resistance to abrasion, routine impact and a broad range of industrial chemicals.
- Smooth, easily cleaned finish; a slip-resistant texture can be produced with compatible aggregate.
- High-build protective coating for floors and suitable vertical surfaces.
- Suitable for application without a separate primer where substrate condition and adhesion allow.
- Low-solvent formulation intended for industrial and commercial floor protection.
Typical uses
- Car park decks
- Industrial process areas
- Food, beverage and pharmaceutical facilities
- Storage rooms and warehouses
- Stairwells
- Commercial and industrial floor protection
Technical data
Technical properties
Typical values from the technical data sheet. Always confirm with the current data sheet before use.
Key performance
KREVO Floor EP-Coat
+5 °C to +60 °C
Service temperature
>80 MPa
Compressive strength | ASTM D695
>5,000 MPa
Compressive modulus | ASTM D695
>50 MPa
Flexural strength | BS EN 196
>15 MPa
Tensile strength | ASTM D638
>2 MPa
Bond to concrete | BS 1881
Product information
- Chemical base
- Two-component, solvent-free epoxy resin system
- Finish
- Smooth high-build finish; optional broadcast anti-slip finish
- Standard application
- Two coats, 150-200 µm wet film thickness per coat
- VOC content - floor coating
- <100 g/L (specified limit)
- Colours
- RAL 7001, 6029, 7035, 5017, 1001 and 3002; other colours subject to availability
- Storage / shelf life
- 18 months in original sealed containers, dry and shaded, below +30 °C
- Abrasion | ASTM D4060, CS17 wheel
- 41.3 mg loss / 1,000 cycles
- Impact resistance | ASTM D2794
- No cracking
- Static friction | ASTM F609
- Smooth: >0.6 dry / >0.6 wet; anti-slip: >0.9 dry / >1.2 wet
Used together with
Epoxy floor system
KREVO Floor EP-Coat is one step of this system, as shown in our application film. Follow each product's data sheet for compatibility and overcoating times.
-
1Primer
-
2Floor topping or coating
KREVO Floor EP-SL
Epoxy SL
KREVO Floor EP-Coat
This product
FAQ
KREVO Floor EP-Coat: questions
What is KREVO Floor EP-Coat?
KREVO Floor EP-Coat is specified as a two-component, high-build, solvent-free epoxy coating system designed to produce a dense, durable, decorative finish on prepared concrete floors. The coating provides a protective wearing surface for industrial and commercial environments subject to chemical splashes, mechanical traffic and regular cleaning. It may also be specified for suitable wall…
What is KREVO Floor EP-Coat used for?
KREVO Floor EP-Coat is used for: car park decks; industrial process areas; food, beverage and pharmaceutical facilities; storage rooms and warehouses; stairwells; commercial and industrial floor protection.
How is KREVO Floor EP-Coat applied?
In outline: 1. Pour and spread 2. Spiked-roller finish 3. Completed floor. The video on this page shows the process; always follow the technical data sheet for surface preparation, mixing and application details.
What pack sizes is KREVO Floor EP-Coat available in?
KREVO Floor EP-Coat is supplied in 18 L complete set (specified configuration; confirm supplied unit).
What is the shelf life of KREVO Floor EP-Coat?
Shelf life / storage: 18 months in original sealed containers, dry and shaded, below +30 °C.
Is there a technical data sheet for KREVO Floor EP-Coat?
Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.
More in Floor Solutions
PU SL
Floor Solutions
KREVO Floor PU-SL
Self-leveling Urethane Hybrid Flooring · Flow-applied floor topping
View product
PU Screed
Floor Solutions
KREVO Floor PU-Screed
Heavy-duty polyurethane-cement floor screed · Hygienic, slip-resistant finish · 6-12 mm
View product
Epoxy SL
Floor Solutions
KREVO Floor EP-SL
Abrasion- and chemical-resistant self-leveling epoxy flooring · Three-component system · 1–4 mm
View product