Skip to content
Krevo
KREVO Repair EP-Mortar
Concrete Repair

KREVO Repair EP-Mortar

High-strength thixotropic epoxy repair and structural bonding mortar · Two-component system · Up to 30 mm

Type
Epoxy Repair Mortar
Pack sizes
6 kg A+B packs
Shelf life
24 months in sealed packs, dry at +5 °C to +30 °C
Technical data sheet

Overview

KREVO Repair EP-Mortar is specified as a two-component, low-VOC, filled epoxy bonding and repair mortar. Its thixotropic, non-sag consistency is intended for durable bonding of prepared construction materials, structural concrete patch repairs, reprofiling, filling of small holes and sealing of static cracks. The material may be used on sound dry or matt-damp concrete, without standing water.

Advantages

  • High initial and ultimate mechanical strength for structural repairs.
  • Strong adhesion to sound concrete, masonry, stone and prepared steel.
  • Thixotropic and non-sag for vertical and overhead application.
  • Suitable for localized repairs and filling; no primer normally required.
  • Low-shrinkage, moisture-tolerant formulation with abrasion resistance.

Typical uses

  • Structural and non-structural concrete repair
  • Honeycombs and damaged edges
  • Beam, column and wall patching
  • Bonding concrete, masonry, stone and metal
  • Bonded reinforcement and mortar
  • Filling holes, voids and non-moving cracks

Technical data

Technical properties

Typical values from the technical data sheet. Always confirm with the current data sheet before use.

Full data sheet

Key performance

KREVO Repair EP-Mortar

75 MPa

Compressive strength | EN 12190

20 MPa

Tensile strength | EN ISO 527-2

9 GPa

Tensile modulus | EN ISO 527-2

16 MPa

Shear strength | EN 12615

> 20 MPa

Adhesion to prepared steel | EN 12188

0.01%

Shrinkage | EN 12617-1

Approximately 50 °C

Glass transition temperature | EN 12614

Product information

Material type
Two-component, thixotropic epoxy adhesive and repair mortar
Composition
Epoxy resin and selected mineral fillers
Mixing ratio
Part A : Part B = 2 : 1 by weight or volume
Component appearance
Part A: white / Part B: dark grey / mixed: concrete grey
Mixed density
Approximately 2.0 ± 0.1 kg/L at +23 °C
Single-layer thickness
Maximum 30 mm; non-sag up to 20 mm on vertical work
Shelf life / storage
24 months in sealed packs, dry at +5 °C to +30 °C
Adhesion to dry concrete | EN 1542
> 5 MPa; concrete failure
Adhesion to matt-damp concrete | EN 1542
> 5 MPa; concrete failure

FAQ

KREVO Repair EP-Mortar: questions

What is KREVO Repair EP-Mortar?

KREVO Repair EP-Mortar is specified as a two-component, low-VOC, filled epoxy bonding and repair mortar. Its thixotropic, non-sag consistency is intended for durable bonding of prepared construction materials, structural concrete patch repairs, reprofiling, filling of small holes and sealing of static cracks. The material may be used on sound dry or matt-damp concrete, without standing water.

What is KREVO Repair EP-Mortar used for?

KREVO Repair EP-Mortar is used for: structural and non-structural concrete repair; honeycombs and damaged edges; beam, column and wall patching; bonding concrete, masonry, stone and metal; bonded reinforcement and mortar; filling holes, voids and non-moving cracks.

What pack sizes is KREVO Repair EP-Mortar available in?

KREVO Repair EP-Mortar is supplied in 6 kg A+B packs.

What is the shelf life of KREVO Repair EP-Mortar?

Shelf life / storage: 24 months in sealed packs, dry at +5 °C to +30 °C.

Is there a technical data sheet for KREVO Repair EP-Mortar?

Yes. The technical data sheet (PDF) can be downloaded from this page. For project-specific advice or a quotation, send an enquiry to the Krevo technical team.

Ask our team

About: KREVO Repair EP-Mortar